Głowice do czopów - Piły tarczowe, frezy trzpieniowe, wiertła do drewna, brzeszczoty

STACO
- BITS
  - TORX
    - Impact
    - Standard
    - Standard Color
    - Standard Extended
    - Inox
    - Hole
  - PZ
  - PH
  - Flat
  - HEX
  - NUT BITS
  - BITHOLDERS
  - BITS SETS
- MULTITOOLS
- SCREWDRIVERS
  - For bits
  - Screwdrivers
  - Other
- KNIVES
  - Noże z ostrzem łamanym
  - Straight knives
  - Noże do materiałów izolacyjnych
- WOOD CHISELS
- PLIERS
  - Pliers
  - Nipper for locking rings
  - Pincers
  - Electric
- HEX KEYS
  - FLAT-DRAWS
    - Metric system
    - Imperial system
  - Gearless
  - Gearless CW/CCW
  - Double sliding T-bar
  - ALLEN
  - Ratchet handle
  - ADJUSTABLE
  - TORX
  - For pipes
  - Dynamometric
- CUTTERS
  - For sheet metal
  - Universal
  - For wires
- RIVETER
  - Riveter sets
  - Rivets
  - Blind rivet nuts
- HAMMERS
  - Two way mallet
  - Rubber
  - Claw hammer
  - Machinist hammer
  - Stone hammer
  - Roofing hummer
  - Masonry hammer
- NAIL PUNCHES
  - Pin punch
  - Nail punch / Center punch
- CHISELS
- KOBEN
- AXES
- HOLE SAW SET
- HAND SAWS
  - Saws
  - Piła do cięcia ukosowego
  - Metal saws
  - Mitre boxes
  - Blades
- BLADES and SURFORM TOOLS
  - Surform tools
  - Scrapers
  - Blades
  - Block Plane
- MEASUREMENT TOOLS
  - Tape measures
  - Easy Line steel measure
  - Folding rulers
  - Fiberglassblade Tape Measures
  - Line measures
  - Kredy do sznurów traserskich
  - Aluminum rulers
- CALIPERS
- ANGLE SQUARE
- SPIRIT LEVELS
  - Plastic
  - Alu
  - Torpedo
- STAPLE GUN
  - Staple Guns
  - Staples
- SUCTION CUPS
- TOOLBOXES
  - Plastic
  - Plastic with Alu Handles
  - Open Toolbox and Toolbags
  - 3 in 1 Mobile toolbox
- Roll Away Cabinets
  - Roll Away Cabinet
  - Tables
- ORGANIZERS and PEG BOARDS
  - Organizer
  - Peg Boards
- BUNGEES
- TIE DOWNS
  - Standard
  - Quick-loaders
  - Pasy transportowe z automtycznym zwijaniem
  - Lekkie
  - Opakowania zbiorcze
- CLAMPING TOOLS
  - Heavy Duty
  - Quick
  - Clamping
  - Mitre corner clamp
- SAW HORSES
- OTHER
- Torch light
- Tarpaulins
  - Seria Lekka
  - Seria lekka przeźroczysta
  - Seria Greenflex
  - Seria Flex
  - Seria Heavy Duty
  - Seria do ogrodzeń budowlanych
  - Seria do rusztowań
  - Tarpaulin accessories
- Mini exposition
- Transport trolleys
- Workshop shelves
PCD cutting tools for AEROSPACE industry and Composites
- Milling
- Drilling
Clamping Tools
- Multipodpory i akcesoria
- Multi zaciski uniwersalne
- Ściski stolarskie, ślusarskie, spawalnicze
- Ściski stolarskie, ślusarskie, spawalnicze typ G
- Ściski klamrowe, stopniowe, sprężynowe
- Zippers
- Ściski śrubowe kątowe
- Ściski krawędziowe
  - Ściski krawędziowe żeliwne
  - Ściski krawędziowe aluminiowe
- Ściski do stołów spawalniczych i akcesoria spawalnicze
- Toggle Clamps
- Bench Vces & Accessories
- Suction Cups
- Dust curtains
Saw blades
- Multi-Rip Saw Blades
- For Longitudinal Cutting
  - Standard
  - Building
- For Cross
- Chrome Coated Saw Blades
  - Super Fine Finishing Blade and For Longitudinal Cutting
  - 274 Super Fine Finishing Blade
- Fine Cut-Off Saw Blades
- DIA Saw Blades
- Saw Blades for Metal, Non-Ferrous and Plastic Materials
- Ultra Thin-Kerf Saw Blades
- Crosscut Saw Blades
- Grooving Saw Blades
- Sawblades for edge-banding machines
- Saws for Aggregates
- Biscuit Joiner Saw Blased
- Circular Saw Blades for Patch Work & Repair
- DADO Saw Blades
- Garden saws
- Saw toaws
- Jerk heads
- Accessories
Solid Carbide Spiral Bits
- Solid Carbide Spiral Router Bits CMT Orange Tools
- Solid Carbide Spiral Router Bits ITA TOOLS
- Solid Carbide Spiral Bits Xtreme with a Diamond Coating NaDia
- Tools for composite materials aluminium and plexi glass
- Narzędzia do kompozytów, aluminium i tworzyw sztucznych z powłokami
Router Bits
- Router Bits
  - 112 Solid Carbide Router Cutters
  - 113 Router Cutters
  - 7/8/911/12 Router Cutters VHM
  - 7/8/911/12 Straight Bits
  - 912 Frezy proste VHM Z3 NESTING
  - 174/177 with Centre Tip
  - 174 with Centre Tip VHM
  - 175 with Centre Tip VHM
  - 176 with Centre Tip
  - 170/171/180/181 Straight Cutters with Threaded Shank
  - 172/182 Straight Cutters with Threaded Shank
  - Pattern Bits
  - 7/8/906 Flush Trim Router Bits with Double Bearing
  - 7/8/906 Flush Trim Bits
  - 7/8/906 Flush Trim Bits Neg.
  - 952 Frezy proste z łożyskiem Negatywny kąt ostrza
  - 906.41 Frezy proste z podwójnym łożyskiem XTreme
  - 651/652 Pattern Router Bits Z1 with Insert Knives
  - 652 Pattern Router Bits Z1 with Insert Knives
  - FS1 Pattern Router Bits Z2+2 with Insert Knives+
  - FS2 Pattern Router Bits Z6+1 with Insert Knives
  - FS9 Pattern Router Bits Z2+2 with Insert Knives
  - 654 Pattern Router Bits Z2 with Insert Knives
  - 655 Pattern Router Bits Z2 with Insert Knives
  - 653 Pattern Router Bits Z1+1 with Insert Knives
  - 652 Z1 Pattern Bits
  - 656 Z2 Pattern Bits
  - 657.9 Z2 Flush Trim with Insert Knives
  - 657.1 Z2 Flush Trim with Insert Knives
  - 657B Z2 Flush Trim Bits with Insert Knives
- Straihgt Bits
  - 7 | 8 | 901B - 852B
  - 7 | 902
- Weatherseal Bits
  - 7 | 812
  - 7 | 813
  - 711.031
  - 191.635
- Combination Trimmer Bits
  - 7 | 8 | 921
  - 843.064
  - 7 | 843
  - 7 | 842
  - 7 | 8 | 907
  - 807 | 907
  - 7 | 8 | 953
- Keyhole & T-slot Bits
  - 7/8/916-716.061 Panel Pilot Bits with Guide
  - 7/8/950.0001 Keyhole Bits
  - 8/950.6 T-Slot Bits
- Rabbeting Bits
  - 7/8/935 Rabbeting Bits
  - 660 Rabbeting Bits with Insert Knives
  - 660.9 Grande Rabbeting Bits with Insert Knives
  - 8/935.503 The CMT Grande Rabbet Set
  - 7/8/935.001 Rabbeting Sets
- 8/913 Screw Slot Bits
- Lock Miter Bits
  - 8/900.626/126 Tongue & Groove Set
  - 8/955.701 Flute & Bead Set
  - 8/955 Lock Miter Set
  - 8 | 955.503 | 4 Do połączeń kątowych
  - 8/955.501 Reverse Glue Joint Bits
  - Drawer Lock Bits
  - 8/900.616 Finger Joint Bit
  - 8/900.606 Professional Finger Joint Bit
  - 8/955.506 V-Tongue & Groove Set
  - 8/955.510 Edge Banding Bits Set
  - FC1 do czopowania
  - Tenon Cutting Router Bits
  - 8/900.624 Adjustable Shaker Router Bits Sets
  - 8/900.625 Adjustable Tongue & Groove Bit Set for Mission Style Cabinet Doors
  - Dovetail Bits
- Grooving and grooving mills
  - 822.023B Slot Cutters
  - 822.024B Flooring Router Bits
  - 7/862 Edge-Fluting Bits Roundover
  - 8/900.506 Three Wing Slot Cutter Set
  - 7/8/922A/B Slot Cutters
  - 8/923A/B Slot Cutters
  - 822 Three Wing Slot Cutter for Individual Cutter
  - 7/8/924.00 Slot Cutter Arbot without Bearing to Blades 822
  - 7/8/924.10 Slot Cutter Arbot with Bearing to Blades 822
  - 823 Three Wing Slot Cutter for Individual Cutter
  - 7/8/924.00 Slot Cutter Arbot without Bearing to Blades 823
  - 7/8/924.00 Slot Cutter Arbot with Bearing to Blades 823
  - FR1 Bits groove - chamfering
  - FR2 Bits Groove - Fluting
- Router bits for the STRIPLOX Mini system
- Table Edge and Hand rail Bits
- Chamfering tools
  - 7/907 Combination Trimmer Bits
  - 7/8/909 - 7/910 Combination Trimmer Bits Flush Trim
  - 7/809.016 Flush Trim Bits Derlin
  - 809.023 Z3 Flush Trim Bits
  - 703/4/5 - 903/4/5 Chamfer Bits
  - 7/8/936 - 8/957 Chamfer Bits
  - 663 Adjustable Chamfering CNC Cutter
  - V-Groove - Folding - Signmaking CNC Router Cutters with Insert Knives
  - 658 Insert Knives
  - 659 Chamfer Bits with Insert Knives
- Cutters for Windows and Doors
  - 8/955.801 Window Sash Set
  - 8/955.3 Ovolo Sash Bits
  - 955.302 - 855.802 Ovolo Sash Set
  - 8/990 Raised Panel Bits
  - 8/990.5 Raised Panel Bit with Back Cutter
  - 8/990.6 Vertical Raised Panel Bits
  - 8/991.517 Junior Ogee Rail & Stile Set
  - 8/991.x12 Rail & Stile Sets
  - 8/991.5 Rail & Stile Sets
  - 8/991.521 Rail & Stile Sets
  - 8/955.806 Entry Door Router Bit Set
  - 615.004.01 Entry Door Router Bit Set MDF
  - 616.000.01 Complete Set for Decorating on MDF
- Window Sill and Finger Bits
- 8/955 Lock Miter Set
- Cove Bits
  - 7/8/914 Round Nose Bits
  - 7/8/914B Round Nose Pattern Bits
  - 7/8/951 Bowl & Tray Bits
  - 7/851B Z 7/8/951 Bowl & Tray Pattern Bits
  - 8/968 Ball End Bit
  - 7/8/937 Cove Bits
  - 7/8/963/64 Cavetto Edge Mould Bits
  - 7/8/9 "Ovovlo"
  - 7/8/939 Beading Bits
  - 7/8/938 Roundover Bits
  - 938 Zaokrąglające ćwierćwałek DIA
  - 8/900.623 Adjustable Roundover & Bevel Router Bits
  - 8/900.622 Adjustable Double Roundover Router Bits
  - 7/8/954 Bead & Bull Nose Bits
  - 7/8/961 Corner Beading Bits
  - 661 Roundover Holding Bits with Insert Knives
  - 661 Roundover Bits with Insert Knives
- 7/915 V-Grooving Bits for Alucobond
- Profile Bits
  - 965 Stepped Rebate Router Bit
  - 8/965 Decorative Ogee Bits
  - 7/8/965 Decorative Ogee Bits
  - 7/8/965.1 Decorative Ogee Bits
  - 7/8/965B Classical Bead Bits
  - 7/8/948 Plunge Ogee Bits
  - 7/8/948B Plunge Ogee Bits
  - 8/970 Stile & Panel Router Bits
  - 7/8/940/41 Roman Ogee Bits
  - 7/8/944/45 Classical Ogee Bits
  - 7/8/959/60 Ogee Bits
  - 954 Corner Beading Bit
  - 8/956.852/851 CMT Moulding System
  - 8/956.8 Multiprofile Bits
  - 855 | 955.604 profilowe
  - 8/955.901 Moulding Bits
  - 8/955.902 Moulding Bits
  - 8/956.501 8/955.901 Moulding Bits
  - 8/967.5B "Lonnie Bird"
  - 8/967.6B "Lonnie Bird"
  - 7/8/946/47 Ogee with Fillet Bits
  - F64 Adjustable Profil Bits
  - 663.301 Universal Profile Cutter for CNC Machines
  - Router to the system OVVO
  - FZ1 Two-sided Profile Bit
  - FZ2 Quadrant Profile Bit
  - FZ3 Concave Quarters Profile Bit
  - FZ4 Progile Collar Bit
  - FZ5 FF5 Progile Bit
  - F71 Progile Bit
- Lettering Bit and V-Grooving Bits
  - 7/8/949 60° Lettering Bit
  - 7/8/949B 60° Lettering Bit
  - 7/8/958 Laser Point Bit 60° 35°
  - 7/8/915 V-Grooving Bits 90°
  - 7/8/915B V-Grooving Bits 90°
  - V-Grooving & Signmaking Router Bits with Indexable Knives 90°
- Bits For Hard Materials
  - Solid Surface Rounding Over Bits
  - 8/980.521 Solid Surface Decorative Edge Profile Bits
  - Roundover Holding Bits
  - Ogee Bits
  - Chamfer Bits
  - Chamfer Flush Trim Bits
  - 8/981 For Repairs
  - Roundover Bits
  - Solid Surface No-Drip Bit type Delrin
  - Flush Trim Bits
  - 8/980.57 Solid Surface Sink & Trim Bits
  - Solid Surface Wavy Joint Bit
  - Solid Surface Drainboard Bits
  - Solid Surface - Inlay Bits
  - Solid Surface Sink & Trim Bits
  - Solid Surface Sink & Trim Bits 10°
- 8/961.6 Wainscot/Paneling Bits
- Spoilboard surfacing router cutters for solder plates
- 663 Spoiboard Surfacing Router Cutters with Insert Knives
- Spoilboard surfacing router with drilling point for indexable inserts
- Bits Z6 + 3 XTreme with indexable insert cutters
- FS3 Clue Bits Z2+2
- FSA Spiral Bits Z6
- FS4 Spiral Bits Z4+2
- FS8 Spiral Bits Z4+2
- FS5 Spiral Bits For the Production of Log Houses Z2
- FS6 Spiral Bits For the Production of Log Houses Z2
- FS7 For the Production of Log Houses
- GS7 Bit to Jams
- GS8 and GS9 Bit to Jams
- Sets Router Bits
PCD router bits
- Diamond router bits Z1, series DT1
- Diamond router bitss Z2, series DT2
- Diamond router bitss Z3, series DT3
- Diamond router bits Z2+1, series DTS
- Diamond router bits Z1+1 HM, series DTA
- Diamond router bits Z1+1 DIA angle 90, series DTA
- Diamond router bits Z1 with bearing, series DTA
- Diamond router bits Z2 Nesting, series DTN
- Diamond router bits Z2+1 Nesting, series DTN
- Diamond router bits Z2+1, series DTC
- Diamond router bits Z2+2, series DTK
- Diamond router bits Z3+1 TURBO, series DTE
- Diamond router bits Z3+1 TURBO, series DTE NES
- Diamond router bits Z1+1 45°, series DTI
- Diamond router bits Z2+1 45°, series DTI
- Diamond router bits Z3+1 45°, series DTI
- Diamond router bits Z2+2 54,9°, series DTI
- PCD router bits Z3+3 | Z4+4 40°, series DTJ
- PCD router bits Z3+3 | Z4+4 54,9°, series DTJ
- Diamond router bits Z3+1 Nesting, series DTM
- Diamond router bits Z3+3 Nesting, series DTM
- Diamond router bits T-Slot, series FSP
- PCD router cutter with top chamfer 45°, series FDT
- PCD router cutter with down chamfer 45°, series FDT
- PCD router BULLNOSE cutter, series FDJ
- PCD router OVOLO cutter, series FDQ
- PCD router cutter with double chamfer, series FDE
- PCD router cutter with double radius, series FDF
- PCD router FINGER PULL cutter, series FDU
- PCD router cutter with up radius, series FDI
- PCD router cutter, series FDG
- PCD spoilboard surfacing router cutters, series FDP
- PCD slot and grooving router cutters, series FDR
- Profiled diamond router bit for chamfering, series FDH
- PCD complete set for decorating, series FFR.SET.A
- PCD complete set for decorating, series FFR.SET.B
Industrial Dowel Drills
- Solid Carbide Twist Drills Negatively Ground Spurs Sharpening
- Dowel Drills for Through Holes
- Hinge Boring Bits
- Diamond Drills
- Special Drills
- Dredgers and moldings
- Reciprocating Slot Mortising Bits
- Two-Stage Drills
- 543 Mortise Chisel & Bit Sets
- Borers for Wood
- With hexagonal grip
- Shuttering Drill
- Accessories
Fisch Tools
- Drill Sets
- Bit Program - Hexagonal
- Forstner Bit
- Hinge boring bits
- Flat bit
- Auger bits
- Boarding auger bit
  - Boarding auger bit cyl.
  - Boarding auger bit – SDS
- Ice auger bit
- Wood twist drill - professional tool
- Mortise bit
- Tenon cutter
- Countersink
- Drill-bit-program
- Multi purpose drill bit
Jig Saw Blades
- Jig Saw Blades
- Sabre Saw Blades
- Tools for Multi-Cutters
  - Brzeszczoty do narzędzi oscylacyjnych chwyt uniwersalny i Fein Supercut
  - Brzeszczoty do narzędzi oscylacyjnych chwyt Fein STARLOCK
Hole Saws
- Universal - Short Series
- Universal - Long Series
- For Metals
- Diamond
- Diamond hole saws with M14 thread
- Universal with Countersink
- Center drills
- Accessories
Tools with Bore & Router Cutters Shaft Mounted
- Planing - profiling
  - Cutter Heads Without Limiters
  - Cutter Heads With Limiters
  - Rabbeting Cutter Heads
  - Cutter Heads for Rabbeting with Profile Knives
  - 694.019 Planing and Jointing Spiral Cutter Heads
  - GS1.0 for Knives
  - GS2 on the tiles 14x14x2
  - GS3 on the tiles 15x15x2,5
  - GS4 on the tiles 14,3x14,3x2,8
  - GS5 on the tiles 30x12x1,5
  - GWR With fixing Powerlock on the Knives Corrugated
  - GHR With fixing HYDRO on the Knives Corrugated
  - GH1 With fixing HYDRO on the Knives
  - GSB on Knives Type Bulldozer
  - GSC on Knives Type Centrolock
  - GSR For Ribbed Knives
  - GM2 Rounded - Phasing on the Knives Bulldozer
  - GWC With Fixing Powerlock on the Knives Buldozer
  - GWS With fixing Powerlock on the Knives Centrolock
  - GS3 With Fixing Powerlock on the Plates 15 x 15 x 2,5
  - GS6 With Fixing Powerlock
  - GSA Segmented Head
- Multiradius Roundover Cutter Heads
  - 694.003
  - 694.004
  - 694.007
  - 694.005 Adjustable Rounding & Chamfering Sets
  - GZ7 For Interchangeable Plates half-round moulding
  - GZ6 Quadrant Selectable on Removable Plates
  - GZ5 Quadrant For Interchangeable Plates
  - GZ1 For Interchangeable Plates
  - GZ2 Quarter Quarters Right
  - GZ2 Quarter Quadrant Left
  - GZ3 The Half-plucked
  - GZ4 Half-round Moulding Raised
  - GM1 Adjustable Rounding & Chamfering Sets
- Adjustable Grooving Sets
  - 694.001 Piece Adjustable Grooving Sets
  - 694.021/022 Piece Adjustable Grooving Sets
  - GR1
  - GR2
  - Trimming cutters
  - GR4 Z4
  - GR4 Z6
  - GR5 To the Guide Grooves
  - DGR Adjustable Grooving
  - DGR Grooving and Flange
- For Chamfering
  - 694.002 Chamfer Cutter Heads 45°
  - 694.017/18 Adjustable Chamfer Cutter Heads with Positive Stop
  - GF1 angular 45°
  - DGH with DIA head
- For Grooving and Chamfering 45°
- Lock Miter Cutter Heads
  - 694.008
  - 694.009 Reverse Glue Joint Cutter Heads
  - 694.001 45° Lock Miter Cutter Heads
  - GL8 For Fingerjoints
  - GL7 For Fingerjoints
  - G28 For Fingerjoints
  - G28 For Fingerjoints with Interchangeable Plates
  - GL5 For Fingerjoints
  - GL6 For Fingerjoints
  - GL4 For Fingerjoints
  - GL3 For Fingerjoints
  - GL2 For Fingerjoints
  - GL1 For Fingerjoints
  - GLA For Fingerjoints
  - G29 For Fingerjoints
  - GP1 For Tongue-Groove Joints
- For doors
  - 694.012 Raised Panel Cutter Heads
  - 694.013 Professional Raised Panel Cutter Heads
  - 694.014 Rail & Stile Cutter Heads
  - 694.015 Profile & Counter Profile Cutter Head Sets
  - G36 To the Door Frame
  - G38 To the Door Leaf Frames
  - G66 For Door
  - G67 For Door
  - G68 With Saw Blade to Recover the Slat
  - G80 For Sliding Doors
  - GD1 For Door
  - GD2 For Door (for Chucks HSK)
- Profile
  - G01
  - G02
  - G03
  - DGA SOFTY
  - DGQ - Quarter Round
- Multiprofile Cutter Head Sets without Limiters
- Cutters for Edgebanding Machines
  - DGM głowice DIA LOW NOISE do frezowania wstępnego
  - DGM - Premill DIA Cutters Heads
  - DGM PLUS - Premill DIA Cutters Heads
  - DGM standard 30°- Premill DIA Cutters Heads
  - DGM standard 45°- Premill DIA Cutters Heads
  - DGM TOP 54,9°- Premill DIA Cutters Heads
  - DGL - Heads for Replaceable Plates
  - DGM TOP 54,9° Premill DIA Cutters Heads
  - DGB Straight DIA Head 16 | 20 DKN
  - DGB Straight DIA Head HSK25R
  - DGB Angular DIA Head 16 | 20 DKN
  - DGB Angular DIA Head HSK25R
  - DGB Angular DIA Head HSK32
  - DGB Radial DIA Head 16 | 20 DKN
  - DGB RAdial DIA Head HSK25R
  - DGB RAdial DIA Head HSK25R type 17,5
  - DGB RAdial DIA Head HSK25R type 33
  - GKA | GKB
  - GKC
  - GKD
  - GKE
  - GKF
  - GKG
  - GKH
  - GKI
  - GKJ
  - GKK
  - GKL
  - GKM
  - GKP Bimatic
  - GKN SCM
- For Chucks
  - For interchangeable Plates
  - For Solder Plates
- For Floorboard
- For Wainscoting
- For Elevation
- For Skirting Board
- Hedgehog heads
  - GJ1 With straight teeth
  - GJ1 With straight teeth LIGHT
  - GJ2 With a spiral-shaped straight tooth
  - GJ1 With straight teeth LIGHT 211/221
  - GJ1 With a chip breaker
  - GJ1 With a chip breaker LIGHT
  - GJ2 With a chip breaker arranged in a spiral
- For Railing
- For Terrace Board
- For Pivots
  - GC1.0 With Soldered Plates
  - GC1.P WIth Interchangeable Plates
  - GC2 With Interchangeable Plates
  - GC3.0 Soldered Plates with Saw
  - GC3.P Replaceable Plates with Saw
  - G79 With Interchangeable Plates
- For Alucobond
- For Dowels
  - Smooth pins
  - Ribbed pins
- For Plaster
- For Parquet
- For Handrails
- For Forming and Postforming
  - Straight
  - Phase
  - Radial
  - Grooving
  - Cutting
  - Both-side Cutting
- Hogger formatting heads
  - Compact Hoggers for Long Side Cut
  - Hogger type D
  - Hogger Radius
Plates and knives
- Profile Knives and Limiters
- laner and Jointer Knives
- Jointer Knives HSS-HM
- Corrugated Back Moulder Knives
- KH-HK STANDARD
- Planer and Jointer Knives
  - HWM Reversible Knives for Portable Planers
  - 53
  - 54
  - 55
  - 56
  - 57
  - 58
  - 59
  - 60
- Reversible Knives 2 Cutting Edges
  - 1
  - 2
  - 3
  - 4
  - 5
  - 6
  - 7
  - 8
  - 9
  - 10
  - 11
  - 12
  - 13
  - 14
  - 15
  - 16
- Reversible Knives 4 Cutting Edges
  - 17
  - 18
  - 19
  - 20
  - 21
  - 22
  - 23
  - 24
  - 25
  - 26
  - 27
  - 28
  - 29
  - 30
  - 31
  - 32
- Reversible Knives with a Chip Breaker
  - 33
  - 34
  - 35
  - 36
  - 37
  - 38
  - 39
- Reversible Knives Undercut - Grooved
  - 40
  - 41
  - 42
  - 43
  - 44
  - 45
  - 46
  - 47
- Reversible Knives of Milling
  - 48
  - 49
  - 50
  - 52
  - 53
- Systems Reversible Knives
- Reversible Knives for for Edgebanders
  - 74
  - 75
  - 76
  - 77
  - 78
  - 79
  - 80
  - 81_K02
  - 82
  - 83
  - 84
  - 85
  - 86
  - 87
  - K2R
  - 89
  - 90
  - 91
  - 92
  - 93
  - 94
  - 95
  - 96
  - 97
  - 98
  - 99
  - 100_K06
  - 101_K07 RH
  - 102_K07 LH
  - 103
  - 104
  - 105_K14
  - KKJ RH
  - KKJ LH
  - KKC LH
  - KKC RH
  - KKD LH
  - KKD RH
  - 112_K10 RH
  - 113_K10 LH
  - 114_K11 RH
  - 115_K11 LH
  - KKL RH
  - KKL LH
  - KKF LH
  - KKF RH
  - 120_K19 RH
  - 121_K19 LH
  - KKG RH
  - KKG LH
  - KKI LH
  - KKI RH
  - KKK RH
  - KKK LH
  - 124_K25 RH
  - 129_K25 LH
  - KKM
  - 132_K23
  - 133_K24
  - KKF
  - KKE TYP A
  - KKE TYP B
  - KKE TYP C
  - KKE TYP D
  - KKE TYP E
  - KKE TYP F
- PCD blanks
- Cyclins for Edgebanders
  - 135
  - 136
  - 137
  - 138
  - 139
  - 140
  - 141
- HWM Reversible Knives
  - 142
  - 143
  - 144
  - 145
  - 146
  - 147
  - 148
  - 695.005
  - 136203
  - 695.003
  - 695.004
  - 695.007
  - 695.009
  - 695.011
  - 695.012
  - 695.013
  - 695.014
  - 695.015
  - 790.360
- 790 HWM Reversible Knives for FLASHING MILLING MACHINES
CNC Router Cutters & Chucks
- Chuck HSK-63 for collects ER/EOC on CNC machines.
- Chuck with tapered shank HSK-63 for CNC machines.
- Chuck THERMO for CNC machines
- Chuck HSK 50F Biesse Skipper
- Chuck ISO-30 for collects ER32 on CNC machines.
- Chuck with shank ISO-30 carrying drill for CNC machines with Stem
- Chuck with shank ISO-30 carrying drill for CNC machines. With Stem Toothed flange
- Chuck ISO-30 for collects ER32 on CNC machines with toothed Flange
- Chuck HYDRO with shank HSK-63F on CNC machines.
- HSK63F/E to the Saws
  - Base Chucks
  - Adapters fot Chucks Base
  - Security Flanges
  - 183 Uchwyty do pił
- PWL.M chucks Powerlock Standard
- PWL.G Chucks Powerlock With thread
- AER-55A AEROTECH HYDRO
- AER-31A AEROTECH UNIWERSAL
- Collet chuck with tapered shank MK2
- Chuck with shank D 25x55 for collect ER32 for “PS LEUCO” system 183.400
- Chuck with cylindrical shank for saw blades 183.410
- Chuck H6FPDX32L with extended body
- HSK63F TERMO przedłużane
- HSK63F TERMO przedłużane SLIM
- Dust Extraction KINETIC
- Nuts
  - Standard DIN 6499
  - Mini
  - Bearing DIN 6499
  - Standard DIN 6388
  - Bearing DIN 6388
  - For Morse handles
  - 993.530.02
  - 992.123.01 | 02
- Precision Collets
  - ER11 DIN6499
  - ER16 DIN6499
  - ER20 DIN6499
  - ER25 DIN6499
  - ER32 DIN6499
  - ER40 DIN6499
  - EOC16 DIN6388
  - EOC25 DIN6388
  - 124
- ISO Chucks for Precision Collets
  - CDM12BIE
  - CDM10SCM
  - CDM12CMS
  - CDM12ALB
  - 930TIR01
  - 930TIR11
- Accesseries
  - Klucz 991.123
  - Klucz 991.283
  - C-Spanner for "ER32" Precision Collets
  - Klucze 932CHVST | 940CHVST
  - Klucz 925CHVOC | 932CHVOC
  - Klucze 920CHVST | 925CHVST
  - 183 Universal Assembly Supports for Chucks
  - EPDM Rope of Cellular Rubber Round
  - EPDM Rubber Cord Profile
  - SIL Silicone Profile
  - C-Spanner for Saws KINETIC
  - Klucze do uchwytów przedłużanych ER16 | ER25 | EOC25
  - Tuleje dystansowe
- Przedłużki do uchwytów TERMO
Power Tools & Accessories
- Router
  - Router CMT7E 2400W
  - Router CME8E 1000W
  - Router CMT10 550W
  - Części zamienne CMT10
- Multi-Tools
- Industrio Routing System
- Professional Router Table System 999.110
- Superjaws Portable Clamping System CMT200
- Additional templates, Bits and Accessories CMT300
- Ellipse & Circle Cutting Jig CMT3000
- CMT - Enlock 1 Joining System
- Kitchen Worktop Jig CMT650
- CMT Inlay Kit
- 3D Router Carver System
- Organizer 03.51 CMT
- Pocket-Pro Joinery System PPJ-002 CMT
- Universal Hinges Boring System CMT333
- Hettich Hinges Boring Head CMT334
- Universal Boring Template CMT900
- Universal Boring Jig CMT656
- Diamond Whetstones
- Diamond Whetstone File
- Formula 2050: Blade and Bit Cleaner
- Lubricant for Wood
- Bowl & Tray System
- Flexible Templates for Curved and Arched Routing
- Digital Angle Gauge DAG - 001
- Digital Angle Finder DAF - 001
- Digital Moisture Meter DMM - 001
- Digital Height Gauge DHG - 001
- Zestaw akcesorii pomiarowych CMT
- Double-Edge Trimmer DET - 001
- Edge Banding End Trimmer DET - 002
- Laminate/Veneered-Panel Cutter
- Edge Banding Iron
- Bench Block Set
- 12 Corner Radius Router Template Set from 3mm to 25mm TMP-R12
- Folding Ruler FR2M
- Professional Straigh Edge Clamps PGC
- Back-to-Back Connectors for Straight Edge Clamps
- Set of 2 Magnetic Knife Setting Jigs
- CMT Inlay Kit
- CMT 300 Router Base
- Adjustable Precision Router Dado Jig
- Tool Bag
- Carpenter Pencil CMT PCL-1
- Router holder PTC-1
- Professional woodworking clamps
- Profesjonalny popychacz stolarski
- Regulowane zaciski kątowe
- Automatyczny ołówek stolarski
Spare Parts & Accessories
- Head spacers
- 541 Stop Collars with Delrin Sleeve
- 797 Arbors M12x1
- 796 Collet Chucks
- 796 Collet Chucks
- 796.001 / 002 Router Chuck Extensions with Collet
- 796.500 / 600 Collets
- 798 Arbors
- 796 'ER20' Chucks
- 'ER20' Precision Collets for 796.122/142/162 Items
- 796.8 Collets for CMT1E, CMT2E, DeWalt, Felisatti, Metabo, Hand-Held Routers
- 796.780 Collets for Freyud / Casals Hand-Held Routers
- 799 Bushings
- 990 Screws
- 991 Keys for Screws hex
- 991 Keys for Screws torx
- 991 Keys for Kinetic
- 990 Shields for Bearings
- 990.0 Nuts for Arbors
- 541 Stop Collars
- 791 Bearings St
- 796 Reduction for 12/8 mm cutters
- 791 Delrin Conical Bearings
- 791 Delrin Triangular Bearings
- 791 Delrin Cylinrical Bearings
- 791 Bearings Sets
- 541 Shields for Assembly
- Threaded Rings for Cutter Heads 694.001
- 695.998 Spacers Set
- 692/693/695 Wedges for Cutter Heads
- 651 Wedges for Cutter Heads
- 7/8/924 Slot Cutter Arbors
- 615/616 Bodies
- 999.501.09 Tablet - phenol
- 999.501.10 Movable Guide
- 699 Pair of Bore Reducers
- Chucks for Tool with Bore
- Panalign Strips
- 822 Blades HM
- SM Head screws
- TW-006 Torque screwdriver
- TW-200 Torque wrench
Aggregates CNC
- Aggregates MONO
- Aggregates DUO
- Aggregates QUATTRO
- Aggregates VARIO VISO
- Aggregates EXTRA
- Aggregates EXTRA PLUS
- Aggregates EXTRA 2
- Aggregates SOFT TOUCH
- Aggregates SOFT TOUCH 360
- Aggregates SOTTO
- Aggregates VERTI-LINE / HORI-LINE
- Aggregates SOFT CUTTER
- Aggregates MEGA CUTTER
- Aggregates SOFT TOUCH EDGE
- Agregaty SOFT TOUCH ONE
Vacuum Clamping Units
- VC-R Series for Raster Tables
- VC-G Series for Flat Tables
- VC-T Series for Aluminum Flat Tables
- To One-Way Belkow Tables
- To Belkow Dual Circuit Boards
- For BIESSE
- For SCM/MORBIDELLI
- Accessories
- Search by machine
  - Drills
  - CNC
  - Panel Saws
Workbenches
- Professional Workbenches
- DIY Workbenches
- Workbenches for schools
Feed rollers
- Steel rollers
- GUM rolls
- Rubber rollers
  - For MARTIN
Power Tools Virutex
- Planers
- Sanders
- Trimmers & routers
- Installation and Restoration
- Machines for Parquet Industry
  - Trimming Machine RZ270S
  - Corner Trimmer FR817T
- Saws
- Jigsaws
  - Wyrzynarka SC324
- Dust Collectors & Professional Dust Collectors
- Laminate Cutters
- Hand Gluers
- Clamping Systems & Heat Gun
- Edgebanders
- Stationary Edgebander
- Cordless screwdrivers
  - Wkrętarka akumulatorowa ATB40
- Templates & Accessories
- Edge Trimmers
- Cleaning Liquids
- Spare parts
  - AB111N Lamelownica
Knives for Cutting Plotters
- Flat Knives HM
- Knives Rounded HM
- Oval Knives HM
- Routers for digital cutters
- Flat Knives HSS
Wireless furniture chargers MINIBATT
- Ładowarki indukcyjne montowane w blatach
- Zasilacze do ładowarek indukcyjnych
  - Zasilacz do ładowarek indukcyjnych MB-ADP-1-USB
- Ładowarki indukcyjne nablatowe
- Ładowarki samochodowe
  - Ładowarka indukcyjna samochodowa MB-PHBOX
  - Ładowarka indukyjna samochodowa uchwyt MB-PWDRIVE
- Stacje ładowania indukcyjnego
  - Stacja ładowania indukcyjnego MB-PWTABLE
  - Stacja ładowania rozłączna wieża MB-TW
- Powerbanki indukcyjne
  - Powerbank indukcyjny MB-PGOO
Tools for composite materials and aluminium
- Routers VHM for composite materials
- Spiral cutters Z1 for Plexiglass and aluminum
- Spiral cutters Z2 - Aluminum and composites
- Spiral cutters Z3 - Aluminum and composites
  - Spiral finishing cutters Z3 193Ra - Aluminum Plastics
  - Spiral Cutter with Chipbreaker Z3 195Ra - Aluminum Plastics
- Spiral cutters - 3D Models
- Special cutters
- PCD router bits for composite materials - 3D Models
OVVO furniture connection system
- Złącza do materiałów o grubości 15 - 18 mm
- Złącza do materiałów o grubości 12-15 mm
- Złącza do materiałów o grubości powyżej 19 mm
  - 1240R połączenie rozłączne ( CNC 4/5 osi )
  - 1240P połączenie stałe ( CNC 4/5 osi )
- Frezy do systemu OVVO

	D [mm]	F [mm]	D1 [mm]	V	I min [mm]	I maks [mm]	TYP	OBROTY	Symbol
	60,00	20,00	80,00	6	10.00	35,00	A	LH	GC1.080MP1035.00L	F [mm]: 20.00 D1 [mm]: 80.00 V: 6 I min [mm]: 10.00 I maks [mm]: 35.00 TYP: A OBROTY: LH
	60,00	20,00	80,00	6	10.00	35,00	A	RH	GC1.080MP1035.00R	F [mm]: 20.00 D1 [mm]: 80.00 V: 6 I min [mm]: 10.00 I maks [mm]: 35.00 TYP: A OBROTY: RH
	70,00	20,00	89,00	6	10.00	35,00	C	LH	GC1.089MP1035.00L	F [mm]: 20.00 D1 [mm]: 89.00 V: 6 I min [mm]: 10.00 I maks [mm]: 35.00 TYP: C OBROTY: LH
	70,00	20,00	89,00	6	10.00	35,00	C	RH	GC1.089MP1035.00R	F [mm]: 20.00 D1 [mm]: 89.00 V: 6 I min [mm]: 10.00 I maks [mm]: 35.00 TYP: C OBROTY: RH
	80,00	20,00	104,00	6	10.00	35,00	B	LH	GC1.104MP1035.00L	F [mm]: 20.00 D1 [mm]: 104.00 V: 6 I min [mm]: 10.00 I maks [mm]: 35.00 TYP: B OBROTY: LH
	70,00	20,00	104,00	6	10.00	35,00	B	RH	GC1.104MP1035.00R	F [mm]: 20.00 D1 [mm]: 104.00 V: 6 I min [mm]: 10.00 I maks [mm]: 35.00 TYP: B OBROTY: RH
	70,00	20,00	125,00	6	10.00	35,00	D	LH	GC1.125MP1035.00L	F [mm]: 20.00 D1 [mm]: 125.00 V: 6 I min [mm]: 10.00 I maks [mm]: 35.00 TYP: D OBROTY: LH
	70,00	20,00	125,00	6	10.00	35,00	D	RH	GC1.125MP1035.00R	F [mm]: 20.00 D1 [mm]: 125.00 V: 6 I min [mm]: 10.00 I maks [mm]: 35.00 TYP: D OBROTY: RH
	70,00	20,00	125,00	6	10.00	35,00	E	LH	GC1.125MP1035.01L	F [mm]: 20.00 D1 [mm]: 125.00 V: 6 I min [mm]: 10.00 I maks [mm]: 35.00 TYP: E OBROTY: LH
	70,00	20,00	125,00	6	10.00	35,00	E	RH	GC1.125MP1035.01R	F [mm]: 20.00 D1 [mm]: 125.00 V: 6 I min [mm]: 10.00 I maks [mm]: 35.00 TYP: E OBROTY: RH
Page size:

Filterx

GC1.0 na płytki wlutowane

GC1.0 na płytki wlutowane

Contact

ITA Tools Sp. z o.o.
ul. Wodna 9
30-556 Kraków

tel.: +48 12 306 79 00
fax: +48 12 306 79 08
e-mail: biuro@itatools.pl

Contact

ITA Tools Sp. z o.o.
ul. Wodna 9
30-556 Kraków

tel.: +48 12 306 79 00
fax: +48 12 306 79 08
e-mail: biuro@itatools.pl











Additional filter 1

Filterx

GC1.0 na płytki wlutowane

GC1.0 na płytki wlutowane

Contact

ITA Tools Sp. z o.o.ul. Wodna 930-556 Krakówtel.: +48 12 306 79 00fax: +48 12 306 79 08e-mail: biuro@itatools.pl

Contact

ITA Tools Sp. z o.o.ul. Wodna 930-556 Krakówtel.: +48 12 306 79 00fax: +48 12 306 79 08e-mail: biuro@itatools.pl

ITA Tools Sp. z o.o.
ul. Wodna 9
30-556 Kraków

tel.: +48 12 306 79 00
fax: +48 12 306 79 08
e-mail: biuro@itatools.pl

ITA Tools Sp. z o.o.
ul. Wodna 9
30-556 Kraków

tel.: +48 12 306 79 00
fax: +48 12 306 79 08
e-mail: biuro@itatools.pl